Skip to content
Stitch Toolbox

Converter

EMD to JEF converter

Turn a EMD file (Elna machines) into JEF (Janome, Elna and Kenmore machines). Drop the file, JEF is preselected, download. Runs in your browser; nothing is uploaded.

What this conversion keeps and changes

  • EMD carries no colour information, only stops, so each block gets a placeholder colour in the JEF. Recolour the blocks in the viewer before downloading if the machine screen matters.
  • Trims: EMD marks them as explicit; JEF as zero-length jumps. They are translated, not dropped.
  • Maximum stitch length is 12.7 mm in JEF, which covers everything a EMD can hold.
  • Colours are indices into the Janome thread chart, which is what the machine screen shows.

A EMD file has no colours to bring across, so the JEF gets placeholder colours in block order. If you also have the design in a format with colours, convert from that one instead.

Inside a EMD file

  • Read by: Elna machines.
  • Colours: no colours at all, only stops between blocks, so the operator threads needles from a colour sheet.
  • Trims: explicit.
  • Longest stitch per record: 12.7 mm; anything longer is written as two.

Inside a JEF file

  • Read by: Janome, Elna and Kenmore machines.
  • Colours: colours as indices into a fixed palette, so each thread becomes the nearest palette entry.
  • Trims: zero-length jumps.
  • Longest stitch per record: 12.7 mm; anything longer is written as two.
  • Colours are indices into the Janome thread chart, which is what the machine screen shows.

When you need this conversion

Designs are sold and shared in the format of the digitiser's software, and EMD is common because Elna machines use it. If your machine is one of the Janome, Elna and Kenmore models, it wants JEF. The stitches are the same; only the container changes, and the notes above are the whole list of what the container cannot carry.

Before a paid job, run the result through the pre-flight check for density and hoop fit, and read the conversion guide for the traps that are specific to each pair.

PES → JEFDST → JEFSEW → JEFVP3 → JEFEXP → JEF

How to use it

  1. 1

    Drop the EMD file

    Drag it onto the page or click to choose it. The file is decoded on your device and drawn on a hoop grid with its size, stitch count and colour blocks.

  2. 2

    Check the preview

    Step through the sew-out order if you want to see how the machine will run it. Rotate or mirror here if the placement needs it; centring is on by default.

  3. 3

    Download the JEF

    JEF is already selected as the output. The file is written and read back on your device before the download starts.

  4. 4

    Copy the colours over

    Open the result in the viewer to see the colours the JEF now stores and check them against the design's colour sheet.

Questions

What changes when converting EMD to JEF?

EMD carries no colour information, only stops, so each block gets a placeholder colour in the JEF. Recolour the blocks in the viewer before downloading if the machine screen matters. Trims: EMD marks them as explicit; JEF as zero-length jumps. They are translated, not dropped. Maximum stitch length is 12.7 mm in JEF, which covers everything a EMD can hold. Colours are indices into the Janome thread chart, which is what the machine screen shows.

Which machines read JEF?

Janome, Elna and Kenmore machines. Colours are indices into the Janome thread chart, which is what the machine screen shows.

Will the JEF stitch identically?

Geometry, yes: every needle position is kept to 0.1 mm, and the writer was checked against pyembroidery. Colours, trims and stops follow what the target format can store, as described on this page.

Is the file uploaded?

No. Reading and writing happen in your browser; close the tab and nothing remains.

Can I resize it at the same time?

Not here. Scaling a stitch file changes its density; use the resize tool, which re-spaces satin, fill and running stitches, then convert the result.

Learn

More tools